Language
NEWS

Equipment maintenance rules

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-06-08 20:35
  • Views:

(Summary description)(1) Before operating the equipment, employees should participate in equipment safety operation regulations and maintenance knowledge training, and can only operate on the machine after obtaining the operation certificate.

Equipment maintenance rules

(Summary description)(1) Before operating the equipment, employees should participate in equipment safety operation regulations and maintenance knowledge training, and can only operate on the machine after obtaining the operation certificate.

  • Categories:Company News
  • Author:
  • Origin:
  • Time of issue:2021-06-08 20:35
  • Views:
Information

1. Equipment requirements:

(1) Before operating the equipment, employees should participate in equipment safety operation regulations and maintenance knowledge training, and can only operate on the machine after obtaining the operation certificate.

(2) Operators should achieve "Three Goods" and "Four Meetings":

"Three Goods" means to manage the equipment well, use the equipment well, and maintain the equipment well;

The "Four Meetings" will use equipment, maintain equipment, inspect equipment, and troubleshoot general faults.

(3) "Five disciplines" of equipment operators:

A. Carry out the operation of fixed person and machine, use the equipment with the operation certificate, and strictly abide by the safe operation regulations;

B. Always keep the equipment clean and tidy, add oil according to regulations to ensure reasonable lubrication;

C. Observe the daily inspection and shift shift system;

D. Take care of tools and accessories, and not lose them;

E. If an abnormality is found, stop and check immediately. If you cannot handle the problem, you should report it in time and cooperate with the maintenance personnel to eliminate it.

4. "Four requirements" for equipment maintenance:

(1) Tidy: tools, workpieces and accessories are placed neatly, low parts of equipment and safety protection devices are complete, wiring and pipelines are complete;

(2) Cleaning: clean the inside and outside of the equipment, all sliding surfaces, screws, racks, etc., have no oil, no bruises, no oil leakage, no air leakage, no electricity leakage, cutting garbage, leftovers, etc.;

(3) Lubrication: refuel and change the oil on time, the oil quality meets the requirements, the oil can, the oil gun, the oil cup, and the nozzle are all, the oil mark is bright, and the oil path is unblocked;

(4) Safety: Implement the system of fixed personnel and machine and shift shift, familiar with the equipment structure, abide by the operation and maintenance procedures, rational use, careful maintenance, monitoring of abnormal conditions, and no accidents.

Relevant Information

Contact Us

TEL: +86-379-68777181

PHO: +86-159-3792-4313

FAX:+86-379-64861689

EMAIL:export@jw-bearing.com

ADD:Yiyang Industry Gathering Zone,Luoyang City, China

Copyright © Luoyang Jiawei Bearing Manufacturing Co., Ltd.

Powered by www.300.cn       This website supports IPV6 access