Recently, Luoyang Jiawei Bearing Manufacturing Co., Ltd. has completed a set of large non-standard customized slewing bearings. The bearings are for the main machine manufacturer's own use. After passing the inspection and acceptance at the factory, the bearings were delivered to the site smoothly.

(1) Before operating the equipment, employees should participate in equipment safety operation regulations and maintenance knowledge training, and can only operate on the machine after obtaining the operation certificate.

Tapered roller bearings are mainly subjected to combined radial and axial loads based on the radial direction. The bearing capacity depends on the raceway angle of the outer ring, the larger the angle, the greater the bearing capacity. This type of bearing is a separable bearing, which is divided into single-row, double-row and four-row tapered roller bearings according to the number of rows of rolling elements in the bearing.

Bearings are the precision low parts of mechanical equipment. How to increase productivity in factories, the performance of mechanical equipment must be better, and one of the larger relationships with the performance of mechanical equipment-bearings. Therefore, the factory must conduct a good inspection of the bearings in the machinery and equipment during production and processing. For the sake of safety, China Bearing Network shares the three major identification methods of bearing faults, and I hope it will be helpful to everyone.

Hybrid ceramic bearings may be relatively uncommon, and the main configuration of hybrid ceramic bearings is a combination of inner and outer ring bearing steel / stainless steel + ceramic balls + PA66 / stainless steel retainer + 2RS/ZZ. Hybrid ceramic bearings have the following four advantages during use.

To check high-quality NSK bearings, users must have the following knowledge:A Which standard is used for the inspection of NSK bearing products;B. What are the inspection items of NSK bearing products;C What preparations need to be made before NSK bearing products undergo quality inspection;

Before understanding how to use high-quality bearings, we must first know what a bearing is. The editor tells you that it is an important basic and low part of various mechanical equipment. Its accuracy, performance, life and reliability have an impact on the accuracy, performance, and life of the host. And reliability plays a decisive role. We must ensure that high-quality bearings play a role in the main engine, ensure that the bearing cage correctly guides the rolling elements, does not drop or clamp the rolling elements, the pocket clearance is appropriate, the rotation is flexible, and there is no blocking phenomenon.

Whether the bearing is installed well or not will affect the accuracy, life and performance of the bearing. Therefore, please fully study the installation of the bearing, that is, please install the bearing in accordance with the operating standards including the following items.

The main shaft bearing in the engine is a particularly important component. Once the main shaft bearing fails, it will directly cause the engine to stop running. In order to improve the reliability of the engine, we must take certain measures to improve the efficiency of the bearing. Based on the understanding of all aspects of bearing knowledge, China Bearing Network will share with you, we can consider from seven aspects, which can improve the reliability of the main shaft bearing of the engine.

Before assembling the precision bearing, the support should be dealt with to remove the stress, thereby reducing the deformation of the bearing support, and the contact surface of the support and the bearing must be cleaned up during assembly. And the bearing must be hoisted or stored horizontally, never vertical hoisting or a kind of storage to avoid deformation.

The radial clearance of the vacuum pump bearing refers to the bearing that can bear radial load in the non-preloaded state. The radial clearance is: along any angular direction in the radial direction, when there is no external load, the outer ring is relative to the inner An arithmetic average of the radial distance that the circle moves from a radial eccentric position to the opposite position.